Toro

 

On the Toro Grandstand and Multiforce Standers there are little tabs that come off the OEM Deflector supports.  There is not room to mount our base in between these tabs.  You will either have to raise the unit up above the tabs (~1.5") (FYI - We include spacers in all kits), or mount behind the tabs and use spacers to extend the swing arm out to the deck edge.  The Zero Turns and Walk-Behinds don't have those tabs coming off at a right angle, so our base will fit into between the OEM Deflector supports.   

 

These are the models we've been able to verify 'The Green Guard' fits on:

 1.) Toro Grandstand - 36" Deck - [HD] or 'SLIM'.  (Use Spacers to raise unit 1.5" to clear tabs.) (Lower motor 1" to allow full deck height adjustment.) (Does not work with 'no-drill' kit.  Must be bolted on.) 

2.) Toro Grandstand - 48" & 52" Deck - [HD] or Original.  (Use Spacers to raise unit 1.5" to clear tabs, or mount behind tabs and extend swing arm.) (Does work with 'no-drill' kit, if you mount behind tabs.) 

3.) Toro Multi-force - 52" & 60" Deck - [HD] or Original.  (Use Spacers to raise unit 1.5" to clear tabs, or mount behind tabs and extend swing arm.) (Does work with 'no-drill' kit, if you mount behind tabs.) 

4.) Toro 2000 and 4000 Series Z's with 52" & 60" Deck - [HD] or Original.  (Mount Base in between supports for OEM deflector.  (Does work with 'no-drill' kit.) 

5.) Toro Pro-Line HDX - 36" Deck - 'SLIM [HD]' or 'SLIM'.   (Does work with 'no-drill' kit.)